Showing results 1 to 6 of 6

Thread: How to watch TV across a wireless network

  1. #1

    Default How to watch TV across a wireless network

    Okay this little trick is for those who have a TV Tuner Card.
    The desktop streams a TV signal that it gets through its TV-tuner card via Windows Media Encoder 9, which you can download from Microsoft for free at http://www.microsoft.com/windows/win...r/default.aspx.
    As you will see, once you have things set up on your desktop server, you simply have to connect to the server via Windows Media Player to view your live TV broadcast.
    Server-Side Setup

    I assume that you have already set up your TV-tuner card in your desktop computer so that you are able to watch TV directly on the desktop machine. Refer to your TV-tuner card's documentation for this prerequisite. Next, you need to download and install Windows Media Encoder 9. This installation process is pretty straightforward: Simply agree to the unabridged dictionary (a.k.a. the end user license agreement) and choose a hard-drive location to install the encoder (see Figure 2).
    Figure 2 Installing Windows Media Encoder 9.

    Next, fire up Windows Media Encoder by going to Start, Programs, Windows Media, Windows Media Encoder (see Figure 3).
    Figure 3 Starting up Windows Media Encoder 9 Series.

    By default, when you start up Windows Media Encoder, you are presented with a New Session Wizard. However, before you create a new session, you need to make sure your video format is set properly. Click Cancel to exit the New Session Wizard. Go to Tools, Options, and, on the General tab, make sure your default video format is set properly for your TV-tuner card. If you live in the United States, this setting should be NTSC, as shown in Figure 4.
    Figure 4 Choosing the default video format for your TV-tuner card.

    With your default video format set properly, you are ready to move on to creating your streaming session. Microsoft provides an easy-to-use wizard, which, if you recall, you saw upon startup but cancelled out of. You can get back to the wizard by clicking the New Session button (see Figure 5).
    Figure 5 Creating a new session.

    When presented with the wizard, choose the Broadcast a Live Event option, shown in Figure 6.
    Figure 6 Choosing the Broadcast a Live Event option.

    The New Session Wizard presents you with a Device Options screen. You need to specify a video and audio source for your live broadcast. For the video device, choose your TV-tuner card's option (in my case, Hauppage WinTV Capture) from the pull-down menu (see Figure 7). Then click the Configure button next to the device to set properties for the device. The properties you are presented with vary according to device.
    Figure 7 Selecting and configuring your video device.

    For the Hauppage TV-tuner card I have, I was presented with the option to change the channel to stream, as well as my video source (cable or antenna), as you can see in Figure 8. I was also able to control such things as the contrast and brightness of my video signal. Take your time to configure your TV-tuner card to the appropriate settings. If you are unsure of what settings are appropriate, refer to your TV-tuner card manual.
    Figure 8 Setting properties for your video device.

    The next item of business is to configure your audio device (which should be set to the default audio device). (See Figure 9.)
    Figure 9 Selecting and Configuring Your Audio Device.

    As before, what you are presented with when you try to configure your audio device varies based on audio device. As shown in Figure 10, for my audio device, I was presented with the option to control the balance of my audio signal, as well as such things as treble and bass. I had to press the Enable button before I was able to stream audio properly.
    Figure 10 Configuring the default audio device.

    After returning to the Device Options screen, click Next in the wizard. You then are asked how you want to broadcast your encoded content. Choose the option Pull from the Encoder (see Figure 11) and click Next.
    Figure 11 Choosing the Pull from the Encoder option for your broadcast method.

    Next you are presented with a Broadcast Connection screen. Here you establish a port through which clients will access the live broadcast. You can specify a port manually, or you can click the Find Free Port button to discover an open port, as shown in Figure 12. I suggest using the Find Free Port option.
    Figure 12 Establishing the port through which players will access your stream.

    When a free port has been established and specified, you should take note of the URL in the box labeled URL for Internet Connections (see Figure 13). You'll use this URL later when setting up your client workstation (a.k.a. the laptop in your setup) to listen to your broadcast. After jotting down the URL, click Next.
    Figure 13 Use the Find Free Port utility to discover an open port on your server via which clients can connect to your stream.

    You are presented with an Encoding Options screen. The options you pick here depend greatly on what type of a wireless network you have. As you might know, wireless network performance varies on the density of the walls that the wireless signal must pass through. In short, the higher the total bit rate and the frame rate are, and the larger the output size are, the more demands there are on your network. If you choose settings that are too high or too low, your stream will become choppy. I suggest modifying your encoding options a few times via an iterative process to figure out which encoding methodology is optimal for your network. As shown in Figure 14, I found that the options Multiple Bit Rates Video (CBR) for both video and audio were good. In particular, I checked the 1128Kbps Total Bit Rate, 29.97fps Frame Rate, and 320x240 Output Size options.
    Figure 14 Choosing the encoding options for your stream.

    Next in the wizard, you can choose if and where you want to create an archive of your broadcast stream (see Figure 15). Windows Media Encoder uses the WMV format to store your archives. Note that video files can become huge if you are recording for a large amount of time, so use this setting judiciously. You are not required to archive your stream.
    Figure 15 Opting to archive a copy of your broadcast to a file.

    Next you are presented with the ability to include video files at the beginning, middle, or end of your video stream. This is a provision via which you can include such things as prerecorded video previews or snazzy "brought to you by" screens. Skip this option for this exercise by selecting No, I Want to Encode from My Selected Devices Only (see Figure 16).
    Figure 16 Choosing not to include video files in your stream.

    After clicking Next, you are presented with a Display Information window (see Figure 17), where you can add display information about your content. If you want to specify this information, you can do so here; it will be seen by clients that connect to your broadcast stream. Otherwise, you can leave this blank.
    Figure 17 Specifying display information for your feed.

    Click Next; you are presented with a summary of what you configured with the wizard (see Figure 18).
    Figure 18 Viewing the summary of your session configuration via the New Session Wizard.

    When you are finished with the wizard, you are presented with a dialog box stating, "By default there is no restriction on which clients can connect to this broadcast" (see Figure 19). In short, you are being told that anyone on your network can view your broadcast. If you'd like to restrict who on your network can view the broadcast, Windows Media Encoder enables you to do this. This restriction process is an advanced topic and is beyond the scope of this article. However, you can learn how to restrict via IP address with the Help documentation provided with Windows Media Encoder.
    Figure 19 Dialog box telling you that you can restrict access by IP address.

    "Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."

  2. #2

    Default

    continued...

    After you click OK on the dialog box, you should be able to see your incoming TV channel that you want to broadcast as a stream. If you do not, click the Properties button to modify the configuration options of your video device set earlier until you start seeing your incoming TV-tuner signal. If you see your TV-tuner signal and it is presenting the channel you want to broadcast, you are ready to start broadcasting. Simply press the Start Encoding button to start the broadcasting and encoding (see Figure 20).
    Figure 20 Start encoding and streaming your incoming TV signal by clicking the Start Encoding button.

    Client-Side Setup

    Now that you have your server broadcasting your incoming TV signal, you need to configure your client (your laptop) to listen for the broadcast stream. Don't worry, this part is painless. Simply fire up Windows Media Player and choose File, Open URL. Then specify the URL of the stream you jotted down earlier. In my case, it was http://192.168.254.10:1103 (see Figure 21).
    Figure 21

    Figure 21 Specifying the URL of your broadcast.

    When you click OK, you should start seeing your live TV signal in Windows Media Player (see Figure 22). Note that the word "live" is a bit misleading; there might be a bit of delay caused by the encoding process and by the wireless transmission of the stream, but you should experience no major lag.

    If you run into problems connecting to the server's stream from your client machine, make sure that firewalls on both machines are configured to allow for incoming and outgoing connections, respectively.
    Figure 22

    Figure 22 Watching the live broadcast on your client machine with Windows Media Player.
    note this is not my own work just information i found off of googles cache due to the site not existing anymore. it works great!

    "Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."

  3. #3

    Default

    Easier/quicker way: Stream it to your 360.

  4. #4
    Senior Member

    Inquisitor
    MiCrOz's Avatar
    Join Date
    Aug 2005
    Location
    Cherry Hill, NJ
    Posts
    4,807

    Default

    Quote Originally Posted by Eppie.gov View Post
    Easier/quicker way: Stream it to your 360.
    Why would you stream a TV signal...to a TV?

    The point is to stream it to another computer on a wireless network.

    Quote Originally Posted by Dyndrilliac View Post
    Seriously, I have done a lot of drugs. A lot of ****ing drugs. I would snort a line of cocaine off a piss stained urinal in some truck-stop dive with my closest friends and family looking on in disgust before I took anything from somebody I didn't know and trust. That's just ****ing dumb.

  5. #5
    Senior Member
    Gold Member

    High Priest
    YonderKnight's Avatar
    Join Date
    Sep 2004
    Location
    USA, California
    Posts
    1,442

    Default

    Slingbox!

  6. #6

    Default

    it also can stream across the internet if you configure it properly.

    "Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Microsoft wireless keyboards crypto cracked
    By gamepin126 in forum General Chat
    Replies: 0
    Last Post: 12-04-2007, 07:16 AM
  2. Security Information
    By Belphegor in forum Hardware and Software
    Replies: 1
    Last Post: 05-21-2007, 05:22 PM
  3. Need help with wireless router
    By SPARTEN II in forum Hardware and Software
    Replies: 4
    Last Post: 02-19-2006, 05:08 PM

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •