Is Jakor a fraud?

[Jakor]

Post your thoughts.

Thanks,
Jakor

[NickF]

Lol.....Jakor you are either an ass who played a joke on me or a fraud. I voted for a fruad considering it does sort of make sence.

[DA(]

Based on the other thread? You didn't say it wasn't true. Also, why do you have a link to bwhacks in your siganture?

[llafnwod]

Lol.....Jakor you are either an ass who played a joke on me or a fraud. I voted for a fruad considering it does sort of make sence.

Just because you fake your talent doesn't mean everyone else does, too.

[[Spyder]AgentGOD]

He's a goddamn fraud. He admitted it himself, twice, if not 3.

[NickF]

Just because you fake your talent doesn't mean everyone else does, too.

Fake what talent?

[[Spyder]AgentGOD]

Downfall, please use some logical sentences next time, instead of using illegible (illogical) ones.

[CREATINE1]

After going to school with Jakor for two years, I know he is not a fraud, he is pure genious.

[DA(]

llafnwod, please type in coherent English.*

[SmashedPumpkins]

After going to school with Jakor for two years, I know he is not a fraud, he is pure genious.

Yea along with your avatar...

[[Spyder]AgentGOD]

He's being illogical, thus making his sentence completely illegible.

[Jakor]

[16:42] Gamehacker13: So... You just think I'm one big idiot huh?
[16:42] jakorporph: well maby
[16:42] jakorporph: you are arn't you?
[16:43] Gamehacker13: well it isn't the first time you have ever made me look like an idiot online.
[16:43] jakorporph: look like the idiot that you are?
[16:43] Gamehacker13: yes
[16:43] Gamehacker13: i mean no
[16:43] jakorporph: BTW, I did your mom last night!
[16:44] Gamehacker13: you couldn't have, cause I was doing her last night
[16:44] jakorporph: Well, I was doing your mom and you were doing your dad.
[16:45] Gamehacker13: oh is that how it goes
[16:45] jakorporph: ya, you were too drunk to remember
[16:45] Gamehacker13: mmmmm drunk.... im gona go get drunk now
[16:45] jakorporph: ya i'm gona post this log up online
[16:46] Gamehacker13: do it noone will believe you

I rest my case.

[Jakor]

[16:42] zig mov: So... You just think I'm one big idiot huh?
[16:43] jakorporph: well maby
[16:43] jakorporph: you are arn't you?
[16:43] zig mov: well it isn't the first time you have ever made me look like an idiot online.
[16:43] jakorporph: look like the idiot that you are?
[16:43] zig mov: yes
[16:43] zig mov: i mean no
[16:44] jakorporph: BTW, I did your mom last night!
[16:44] zig mov: you couldn't have, cause I was doing her last night
[16:44] jakorporph: Well, I was doing your mom and you were doing your dad.
[16:45] zig mov: oh is that how it goes
[16:45] jakorporph: ya, you were too drunk to remember
[16:45] zig mov: mmmmm drunk.... im gona go get drunk now
[16:45] jakorporph: ya i'm gona post this log up online
[16:45] zig mov: do it noone will believe you

[[Spyder]AgentGOD]

LOL @ Convo

No, Wesley created a fake conversation.

#EDIT: LOL @ trying to fake a convo and double post

[NickF]

That's just idiotic. Why would I IM you saying that i'm an idiot? You can tell that he made it up to mock me. Also I would like to point out that even drakken suspected this of jakor, if you want to pull up the post go ahead. It was when jakor first realesed his multicommand, and drakken said it was his with the functions in a slightly differant order.

[[Spyder]AgentGOD]

http://www.bwhacks.com/forums/showpo...2&postcount=42 - Proof of Jakor's "admission", right here.

[Jakor]

I merely showed how easy it was to fake a conversation. This makes it easier than useing Replace due to the fact that you don't worry about changing text sent.

[SmashedPumpkins]

Yea that was obviously a fake conversation...

[[Spyder]AgentGOD]

I merely showed how easy it was to fake a conversation. This makes it easier than useing Replace due to the fact that you don't worry about changing text sent.

But more importantly, you're right about that you're a fraud.

http://www.bwhacks.com/forums/showpo...2&postcount=42 - Proof of Jakor's "admission", right here.

Disassembly of Jakor's multicommand with comments added by me.

:1000178B pushad                ; Preserve registers
:1000178C cmp byte ptr [100032C8], 01        ; Is multicommand on?
:10001793 jne 1000181C                ; If not jump to the end
:10001799 mov dword ptr [10003820], ecx        ; Store command parameters pointer
:1000179F mov byte ptr [10003824], dl        ; Store command type
:100017A5 mov eax, 0068F3E0            ; First selected unit
:100017AA mov eax, dword ptr [eax]        ; Get first selection unit pointer
:100017AC mov dword ptr [1000381A], eax        ; Store first selection
:100017B1 mov bl, byte ptr [eax+64]        ; Get unit type
:100017B4 mov byte ptr [1000381E], bl        ; Store Unit type
:100017BA mov bl, byte ptr [eax+4C]        ; Get unit owner
:100017BD mov byte ptr [1000381F], bl        ; Store unit owner
:100017C3 mov ecx, 005BC6A8            ; unit list pointer
:100017C8 mov dword ptr [10003390], 00000000    ; counter??
:100017D2 jmp 10001810                ; jump to unit list cycle

* Referenced by a (U)nconditional or (C)onditional Jump at Address:
|:10001813(C)
|
:100017D4 push ecx                ; Store unit params pointer
:100017D5 mov bl, byte ptr [ecx+64]        ; Get unit type
:100017D8 cmp byte ptr [1000381E], bl        ; check unit type
:100017DE jne 1000180C                ; jump if not the same type
:100017E0 mov bl, byte ptr [ecx+4C]        ; get unit owner
:100017E3 cmp byte ptr [1000381F], bl        ; check unit owner
:100017E9 jne 1000180C                ; jump if not the same owner
:100017EB push ecx                ; Store unit params again
:100017EC push 00000001                ; number of units to select
:100017EE call 10001085                ; local function to set selection
:100017F3 mov ecx, dword ptr [10003820]        ; restore unit params pointer
:100017F9 movzx edx, byte ptr [10003824]    ; restore command type
:10001800 call dword ptr [10003008]        ; call command function
:10001806 inc dword ptr [10003390]        ; counter??

* Referenced by a (U)nconditional or (C)onditional Jump at Addresses:
|:100017DE(C), :100017E9(C)
|
:1000180C pop ecx
:1000180D mov ecx, dword ptr [ecx+04]        ; Get pointer to previous unit

* Referenced by a (U)nconditional or (C)onditional Jump at Address:
|:100017D2(U)
|
:10001810 cmp ecx, 00000000            ; Is pointer null? Are we done?
:10001813 jne 100017D4                ; If not start over
:10001815 popad                    ; else restore registers
:10001816 jmp dword ptr [10003379]        ; jump back to sc

* Referenced by a (U)nconditional or (C)onditional Jump at Address:
|:10001793(C)
|
:1000181C call dword ptr [10003008]        ; Call original command
:10001822 popad                    ; restore registers
:10001823 jmp dword ptr [10003379]        ; jump back to sc

My source code straight from damned666.

MultiCmd proc

    pushad                ; Preserve registers
    cmp MultiCommand, 01        ; Is multicommand on?
    jne MA_END            ; If not jump to end

    mov eax, PlrNumOffset
    mov al, byte ptr [eax]        ; Get your player number
    mov PlrNum, al            ; Store Player number
    mov ParamsPtr, ecx        ; Store command parameters pointer
    mov CommandByte, dl        ; Store command type
    mov eax, FirstSelection
    mov eax, dword ptr [eax]    ; Get first selection unit pointer
    mov cl, byte ptr [eax+064h]    ; Get unit type
    mov UnitType, cl        ; Store Unit type
    mov ebp, UnitStructStart    ; Unit list pointer
    mov ebp, dword ptr [ebp]    ; Get unit struct start

MA1:
    mov al, byte ptr [ebp+04Ch]    ; Get unit owner
    cmp al, PlrNum            ; Check unit owner
    jne MA2                ; jump if not the same owner
    mov al, byte ptr [ebp+064h]    ; Get unit type
    cmp al, UnitType        ; Check unit type
    jne MA2                ; jump if not the same type
    xor ecx, ecx
    mov cl, 01            ; Number of units to select
    mov CurrentUnit, ebp
    lea edx, CurrentUnit        ; unit to select
    call dword ptr [SetSelection]    ; Set Selection function
    sub esp, 00000008h

    mov ecx, ParamsPtr        ; set command parameters pointer
    movzx edx, CommandByte        ; set command type
    call dword ptr [IssueCommand]    ; call command function

MA2:
    mov ebp, dword ptr [ebp]    ; Get pointer to next unit
    test ebp, ebp            ; Is pointer null? Are we done?
    jnz MA1                ; If not start over
    mov MultiCommand, 00        ; Turn off MultiCommand

MA_END:
    popad                ; restore registers
    add esp, 0000000Ch        ; fix stack pointer
    ret 0010h            ; return to sc

MultiCmd endp

Disassembly vs. source code...

Maybe you didn't touch damned666, but whoever you got your code from did. These functions are way to similar to be pure ****ing coincidence. There's so many other ways that a multicommand hack can be written that I can't believe you (or whoever really wrote this) would have coincidentally structured so similar to mine.

[XCreepingDeathX]

I doubt he's a fraud. Why would someone go to all that trouble just for fame?
EDIT: lol, the thread number is 11337.